Headlight bezels

[braveheart]

[img src="[/img]i1122.photobucket.com/albums/l535/seve1984/2011-10-05170054-1.jpg"]

Hi folks - not sure if your bezels were suffering like mine...Aluminium pitted and stone pecked but "they'll just need to do"..well i decided to see if they were sortable and here they are...a good bit of prep.. couple of coats of Aluminium Paint, fine line masking tape, satin black and a couple of coats of clear lacquer left to harden and there you have it !!!oh and a lot of patience...i think they look pretty good!!

[vernon240]

They look very good. Now, not many people would notice this (especially Gareth), but I have this eye for detail. I think you may be missing some lights. Just a hunch, but worth checking! You may neeed to adjust your bonnet as it looks slighly high as well. Sometimes the panel gaps on these cars are all over the place!

Your car looks far too clean! Your obviously not driving it enough!

[braveheart]

Thanks Vernon! agreed its a little high but i have travelled hundreds of miles to see cars with bonnets that dont fit as good as that one!!!

[vernon240]

I bet you have. I saw one the other day. Along the scuttle at the corners of the bonnet, it was fine. In the midle of the bonnet, you could get your fingers betwen the bonnet and scuttle due to the bonnet being so high! Something very weird going on there, but looks like the scuttle ends had been replace and made waay to high!