|
|
Post by rscapriman on Sept 28, 2009 16:54:18 GMT
Hi all, went out for lunch yesterday decided to take the RS3100 which would have been its last run as the tax runs out at the end of the month barely got out of the village when bang the bolt holding the fan on had worked loose fell out leaving the fan to introduce itself to the radiator luckily close to home and fan and coupling are reusable but need the bolt and washer to hold it on cannot find a spare one amongst my junk any of you guys got a spare on you are prepared to part with?
RScapriman.
|
|
|
|
Post by vernon240 on Sept 30, 2009 8:56:42 GMT
sorry Len, checked with in my bits, but don't seem to have one. Thought I may have had one on the front of another essex I had, but as I though, no fan assy on there, but more inpoprtantly, no bolt. Do you have a spec on the bolt?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 30, 2009 14:26:53 GMT
I was hoping my one's bolt might still be in situ, or in the bits which came back from Clive. But no such luck.
Interestingly though, my bolt didn't completely undo itself when the fan went potty, because the clearance between the core of the rad and the fan shaft prevented it from doing so. Not that it saved the rad from being destroyed of course...
Anyway, if you have no joy elsewhere Len, give Clive a call, or let me know if you want me to.
Mike
|
|
|
|
Post by rscapriman on Sept 30, 2009 16:13:01 GMT
Thanks for looking Vernon and Mike, dont have a spec for the bolt have not had time to do anything as yet maybe this weekend
|
|
